SynthHD PRO (v2): 10MHz – 24GHz Dual Channel Microwave RF Signal Generator

$2,999.00

The Windfreak Technologies SynthHD PRO is a 10 MHz to 24 GHz dual channel software tunable RF signal generator and frequency sweeper controlled and powered by a device running Windows or Android via its USB port.

Key Features:

  • 10 MHZ to 24 GHZ in 0.1 Hz steps
  • Milled aluminum case for better electrical performance and use in more rugged environments
  • SynthHD PRO has 100uS frequency step time
  • CE certification
  • Easy stack-ability
  • Internal Operating Temperature: -40C to +85C (-40F to +185F)

The SynthHD PRO’s dual independent channels can be configured to run as two different frequencies, or the same frequency with different phases. This allows its use in antenna beam steering applications or quadrature signal generation commonly used in image reject frequency conversion.

The SynthHD PRO also has nonvolatile onboard flash memory so it can be programmed to fire up by itself on any frequency, power, sweep or modulation setting (and combinations thereof) to run without a PC in the field. This makes for a highly mobile, low power, and lightweight solution for your RF signal generation needs.

Expect excellent performance and high reliability despite the SynthHD Pro’s low cost.

In Stock. Ships within 5 business days.

 

We've Got You Covered:

  • No Hassle Refunds - 90 Day Money Back Guarantee!
  • Secure checkout via Credit Card, PayPal, and Venmo
  • Made in The USA with US-Based Technical Support

The Windfreak SynthHD PRO RF signal generator is similar to the SynthHD but has these extra features:

  • Improved calibration for higher amplitude accuracy
  • Milled aluminum case for better electrical performance and use in more rugged environments
  • SynthHD PRO has 100uS frequency step time
  • CE certification
  • Easy stack-ability

CE Certification logo

 

Product Highlights:

  • 10 MHZ to 24 GHZ in 0.1 Hz steps
  • -40 dBm to +18 dBm (typical) in 0.01 dB steps
  • Set each channel to independent frequencies and amplitudes
  • 0 to 360 degrees coherent phase control in 0.01 degree steps on each channel
  • Stack multiple devices for coherent phase control on every channel
  • Select internal 10 or 27MHz reference or use external 10-100MHz reference
  • Pulse, AM, and FM internal modulation including FMCW radar chirp
  • Pulse Modulation with 1uS minimum width and 1uS resolution
  • Pulse, AM, and FM external modulation from DC – 10KHz
  • Powerful Trigger modes allow external triggering of most functions without a PC connected
  • Linear and list mode (frequency and amplitude hopping) sweeps include dual channel differential sweeps
  • Save all settings to the device for use without a PC
  • 32 bit ARM processor onboard which is Arduino compatible
  • Complete Labview GUI executable and source code (pictured below) included with purchase
  • Windows, Linux, and Android compatibility
  • Designed and manufactured in the USA with maximized value and cost ratio

Contact us for custom firmware and hardware options

SynthHD Pro Software GUI (Labview source code included with purchase)

microwave-signal-generator-sw1

The following video shows the SynthHD Pro doing a Pulsed FM Radar Chirp (FMCW) that is simultaneously AM modulated.

The video below is taken with both channels driven into a mixer. The mixer is then fed into an oscilloscope and displayed on the right side of the video. The signal shows the DC and near DC downconverted component. The DC level depends on the phase relationship between the two channels. The switch on the far right of the GUI toggles between controlling channels (RFA or RFB).

For orders over 10 units discounts will apply. Request a quote here. Emails will be answered within 24 hours. Keep an eye on your SPAM folder. You will be given a lead time and a quote if you desire large volume.


Download SynthHD Pro Model

(If drawing does not show up, disable popup blockers such as ublock in chrome.)

Measure dimensions by downloading the model and installing the free edrawings viewer app..